HSMM-Mesh with Raspberry Pi.
I followed the directions from http://kb9mwr.blogspot.com/2013/08/hsmm-mesh-on-raspberry-pi.html to install HSMM-Mesh on my Raspberry Pi.
It appears to work but I can't see either of my other two nodes on Linksys Routers.
On my main Linksys the setings are as follows:
Node Name: W4RS-01
Type: Mesh Node
WIFI
Proto: static
IP: 10.197.235.151
Mask: 255.0.0.0
SSID: BroadbandHamnet-v1
Adhoc
1
LAN
Lanmode: 5 host direct
IP: 10.47.92.185
Mask: 255.255.255.248
DHCP (ticked)
Start: 186
End: 190
WAN
DHCP
DNS1: 8.8.8.8
DNS2: 8.8.4.4
On the Raspberry PI:
WIFI
Proto: static
IP: 10.198.98.8
Netmask: 255.0.0.0
SSID: BroadbandHamnet-v1(changed to be the same as the Linksys
Adhoc
1
LAN
mode: 5 host dmz
IP: 10.51.16.65
Mask: 255.255.255.248
DHCP (ticked)
Start: 66
End: 70
WAN
Proto: DHCP
DNS1: 8.8.8.8
DNS2: 8.8.4.4
i am using an ALFA awus036nh USB WiFi antenna.
What am I missing to get this device to show/connect to the other 2 or my routers and the other HSMM routers in the neighborhood? (there are 5 total)
Thanks
Dick
http://www.broadband-hamnet.org/hsmm-mesh-forums/view-postlist/forum-2-hardware/topic-817-raspberry-pi-a-hsmm-mesh.html
Hopefully you will find some useful information here.
Discussion
https://groups.io/g/AREDN
https://aredn.blogspot.com/
I followed the directions from http://kb9mwr.blogspot.com/2013/08/hsmm-mesh-on-raspberry-pi.html to install HSMM-Mesh on my Raspberry Pi.
It appears to work but I can't see either of my other two nodes on Linksys Routers.
On my main Linksys the setings are as follows:
Node Name: W4RS-01
Type: Mesh Node
WIFI
Proto: static
IP: 10.197.235.151
Mask: 255.0.0.0
SSID: BroadbandHamnet-v1
Adhoc
1
LAN
Lanmode: 5 host direct
IP: 10.47.92.185
Mask: 255.255.255.248
DHCP (ticked)
Start: 186
End: 190
WAN
DHCP
DNS1: 8.8.8.8
DNS2: 8.8.4.4
On the Raspberry PI:
WIFI
Proto: static
IP: 10.198.98.8
Netmask: 255.0.0.0
SSID: BroadbandHamnet-v1(changed to be the same as the Linksys
Adhoc
1
LAN
mode: 5 host dmz
IP: 10.51.16.65
Mask: 255.255.255.248
DHCP (ticked)
Start: 66
End: 70
WAN
Proto: DHCP
DNS1: 8.8.8.8
DNS2: 8.8.4.4
i am using an ALFA awus036nh USB WiFi antenna.
What am I missing to get this device to show/connect to the other 2 or my routers and the other HSMM routers in the neighborhood? (there are 5 total)
Thanks
Dick
http://www.broadband-hamnet.org/hsmm-mesh-forums/view-postlist/forum-2-hardware/topic-817-raspberry-pi-a-hsmm-mesh.html
Hopefully you will find some useful information here.
Discussion
https://groups.io/g/AREDN
https://aredn.blogspot.com/
No comments:
Post a Comment
Thanks for your comments, Comments may take a day to show up
MESH Discussion Forum Group:
AREDN - Amateur Radio Emergency Data Network AREDN@groups.io
https://groups.io/g/AREDN
.
Note: only a member of this blog may post a comment.